HDC6 HDMI EXTENDER OVER CAT5E/6

HDC6 HDMI EXTENDER OVER CAT5E/6
Code: 07351036

A neat and simple high definition HDMI extender kit. This kit extends HDMI signals up to 1080P from your AV source—Blu-ray/DVD players, PS3/4 and XBOX etc—up to 60m via CAT5E/6 cable. Integrates an infra-red control extender for full controllability from the receiving end. RJ45 connections on the rear of both units makes it easy to install.

Features

  • Each set includes one transmitter and one receiver
  • Modular design
  • Connect with single Cat5E/6 cable to reach a longer distance than HDMI cable
  • Transmission distance up to 60m with 1080P video format
  • Auto adjustment of feedback , equalization and gain
  • LED indicators on transmitter and receiver show the status of HDMI connections
  • With IR control signal pass-through
  • Compatible with 3D formats

 

Specifications

Operating Temperature Range –5 to +35°C
Operating Humidity Range 5 to 90% RH (No Condensation)
Input Video Signal 0.5-1.0 Volts p-p
Input DDC Signal 5 Volts p-p (TTL)
Support Video Format DTV/HDTV: 480i / 576i / 480P / 576P / 720P / 1080i / 1080p / 3D video format
Video Output HDMI
Support Audio Format DTS-HD Master Audio, Dolby true-HD etc.
Transmission Distance 1080P 8-bit 60m (Maximum)
over CAT5E/CAT6/24AWG/Solid (recommend to use 23AWG Cat6 cable)
Power consumption 3 Watts (Maximum)
Dimension (LxWxH) 115x70x35mm
IR wavelength & Frequency Wavelength: 940nm
Frequency 38kHz
Net Weight 260g (Pair)
Power supply 2x DC 5V / 1A (included)

 

FAQ

What distances can I get?
Range Format Cable type
60m 1080P / 50Hz Tested with Cat5E Solid conductor F/UTP
(Foil Screened Unshielded Twisted Pair)
40m 1080P / 24Hz Tested with Pro.2 Cat6 Stranded conductor
UTP pre-made patch lead
30m 1080P / 24, 50 & 60 Hz Tested with Pro.2 Cat6 Stranded conductor
UTP pre-made patch lead
Why can’t I get the unit to work up to the expected 60m range?
The 60m range is tested and confirmed for every unit that leaves the factory, so two possible causes may be resulting your range issues:

  1. The range specified is based on the use of solid core F/UTP (foil-screened, unshielded twisted pair) CAT5e or CAT6 cable. Nearly all pre-made patch leads available on the market are stranded core UTP (unshielded twisted pair). Check your cable’s structure.
  2. Only signal formats up to 1080P / 50Hz (or an equivalent bandwidth) can be sent up to 60m. Check the output from your source device is set to no more than 1080P 50Hz for these long runs.

 
 

Downloads

User Manual

Print Page Share This Find a Dealer