HDMIIPECO HDMI EXTENDER OVER ETHERNET

HDMIIPECO HDMI EXTENDER OVER ETHERNET
Code: 07351062

Additional Images

073510620735106207351062073510620735106207351062

HDMIIPECO uses H.264 as compression type, which takes lower bandwidth and transmits the signal over the LAN more smoothly. It transmits the HDMI signal for up to 120m over single Cat5e / 6 cable at point to point, as well as point to many and many to many over Ethernet switch. It can be widely used in various locations, such as meeting room, class room, metro, airport, home, advertisement etc.

Foxtel iQ2 and iQ3 compatible

Features

  • Use H.264 as compression type, high video quality with low bandwidth required
  • Support resolution up to 1080p @ 60Hz, data transmission speed is 2.25 Gbps
  • FOXTEL IQ IR compatiable
  • Real and manageable IP addresses allows HDMI source to be accessed via streaming software such as VLC Player
  • Dip switch to change sources
  • Support LPCM audio format, sample rate is 48kHz
  • Compliant with TCP/IP protocol for transmission
  • Streaming bit rate is up to 15Mbps
  • HDCP Compliant
  • Support RS232 pass through
  • Support Wide-band IR (38k ~ 56kHz)
  • Supports point-to-point, point-to-many, many-to-point, many-to-many broadcasting network configuration
  • Supports DHCP, switch assign IP for the Transmitter and Receiver automatically
  • With 3-Bit DIP to choose baud rate
  • With 6-Bit DIP to manage group ID
  • With HDMI output for local display on Transmitter
  • DC 5V / 2A power supply, power consumption less than 3W

 

Specifications

Performance
Protocol H.264 encoder over TCP/IP
Support Video Format 480i / 480p / 576i / 576p / 720p / 1080i / 1080p @ 60Hz
Support Audio format LPCM, Audio sampling rate 48KHZ
Streaming Bit Rate 15Mbps
HDCP Compliant
IR Frequency 38~56 kHz
RS232 Baud rate Default 2400bps, total 8 kinds optional
IP setting &Group ID setting
Default IP TX: 192.168.1.11
RX: 192.168.1.12
Group ID Group 00 ~ group 63
Request for Switch/Router Supports IGMP
Supports DHCP
Connectors on Transmitter
Input 1xRJ45 input
Output 1x HDMI Female port
RS232 DB9 Male port
IR IR RX port
Environmental & Power Requirements
Operating temperature -5 to +35°C
Operating Humidity Range 5 to 90% RH (No Condensation)
Power supply DC 5V / 2A
Power consumption Max 3 watt
Physical
Dimension 120.2×78.6×29 mm
Net Weight Tx: 0.28kg
Rx: 0.28kg

 

Package Contents

  • 1x Transmitter
  • 1x Receiver
  • 1x IR-TX
  • 1x IR-RX
  • 1x Manual
  • 2x Power adapters 5V 2A (included)

 

FAQ

Does this unit work with the new Foxtel iQ3?
Yes. Just make sure your IR emitter is placed in the correct location. See the image below.