Products |

VGA AND AUDIO OVER CAT5 BALUN AND

PRO1270 VGA+AUDIO OVER CAT5 DISTRIBUTION HUB

Features:

Distribute your VGA+Audio signal via single UTP CAT5/5e to up to 4 zones (8 outputs), each receiver has 2 outputs
Transmission Distance up to 1000ft / 300m via UTP CAT5/5e
With the loopout function on the receiver, it can be set up more than 4 zones.
350 MHz signal transmission bandwidth
Provides 4 ports RJ45 outputs for transmission
With local VGA & audio outputs
12VDC switching mode power supply included
1x VGA + 1x 3.5mm stereo audio input
1x VGA + 1x 3.5mm stereo audio output
4x CAT5 outputs
Distance via CAT5 Cable:
640*480 pixels    (VGA)—300M
800*600 pixels   (SVGA)—200M
1024*768 pixels   (XGA)—180M
1280*1024 pixels (SXGA)—120M
1600*1200 pixels (UXGA) —100M

60W 6-STEP VOLUME ATTENUATOR

PRO1191 60W VOLUME CONTROL 6 STEPS

Specifications:

Clipsal style 6 step volume controller wall plate
For 4, 8 or 16 ohm
Power handling: 60 Watts
Switch: 6 position rotary switch
6dB per step
Dimension: 114 mm x 75mm x 43 mm

BLUETOOTH MUSIC TRANSCEIVER

Bluetooth receiver and transmitter in one!

Features:

Bluetooth 4.2
No app or driver needed
Noise reduction and echo cancellation
Multi-band equalizer configuration
Supports voice prompts
Built-in 400mAh Li-Ion battery
Built-in enhanced signal transmission circuit, connected fast and stable

SPECIFICATIONS:

Bluetooth Version	Bluetooth 4.2, Consume low power
Supported protocol	A2DP,AVRCP,HFP,SPP HID
Current consumption	<43MA(receiving Mode)
	<60MA(Transmitting Mode)
	<18MA(Stanby Mode)
Built-in battery	Polymer 400MAh
Charging current	300MA
playing period	8 hours
Bluetooth distance	10M
Interface	Micro USB / 3.5MM stereo audio port

AV DISTRIBUTION OVER CAT5

but The IR Emitter has to be plugged in IR Link Socket (not from socket 1,2,3)

Distribute composite video and stereo audio plus IR signals using economical CAT5 cable. The PRO1235D is a readyto go kit including a receiver. The system can be expanded up to 4 zones with additional PRO1235DS spare receivers, also available separately.

Please note: For Foxtel IQ2 compatibility, please ensure you use the IR LINK socket for the IR emitters.

Specifications:

Designed to be surface mounted for in-wall composite video, and stereo audio with IR control applications
Transmission distance:
- Audio :300 meters
- Video : 300 meters
Interface:
- 3.5mm mini socket (for emitters)
- 3x RCA connectors (for audio/video)
- 4x RJ45 (for CAT5)

Dimension: 157 mm x 65mm x 29mm
Power supply: 12VDC, 200mA
Loop-out function

Kit includes:

PRO1235 AV + IR distribution hub
PRO1235DS Spare AV + IR receiver
Single IR emitter
Dual IR emitter
IR receiver stick
12V 1.2A switchmode power supply

HDMI VGA WALL PLATE

The fabulous PRO3420 HDMI and VGA wall plate is a convenient solution for setting up a wall-mounted display orceiling mounted projector. This Clipsal-style wall plate features HDMI and VGA connectors for neat, stylish, and uncomplicated connections.

Features

Flexible lead on the rear HDMI socket
Allows easy installation and allows natural fall of cables in-wall
Relieves tension on the wall socket

WALL PLATE RECEIVER FOR

PRO1247DSWP PLATE RECEIVER FOR PRO1247D

Spare receiver for PRO1247D in wall plate type, it includes the IR target in the box.

Features:

Allows you to add more zones to your existing HDTV over CAT5 AV distribution set up
Receives HD video and audio signals from the PRO1247D distribution hub from up to 120 metres
Transmits IR signals to remotely control AV devices
Power LED
Receives power via CAT5 connection with hub
Supports 480p/ 1080i

Connections:

2x RJ45 ports (back of the wall plate)
YPbPr video output (3x RCA)
Coaxial digital audio (DA) output (1x RCA)
Stereo audio (L/ R) output (2x RCA)
1x IR receiver input (3.5mm jack)

Specifications:

Video nominal input level: 1 Volt (peak to peak)
Video output impedance: 75 ohm
Audio output impedance: 300 ohm

Contents:

HDTV over CAT5 receiver
Dual band IR receiver

BLACK BRUSH WALL PLATE

Eco1272B wall plate is basic brush wall plate, compared with Pro1272B wall plate, ECO1272B is made by Polycarbonate plastic (PC) instead of high quality ABS material.

This brush wall plate allows cables to enter the wall cavity space without the need of interconnect wall plates inbetween. Ideal for pre-made leads directly out of the wall cavity, such as HDMI leads, no break in digital signal and no quality loss!

Keep the dust away with its bristle brush design!

Specifications:

Material: Polycarbonate Plastic (PC)
Hole size: 53mm x 24mm
Colour: Black

100W 12-STEP VOLUME WITH IR

Volume Control with IR Receiver

The PRO1161 is a wall mount stereo speaker-level volume control with built-in IR receiver. It connects between the speaker outputs of an amplifier or receiver and a pair of speakers.

The PRO1161 matches thes the minimum output impedance of the amplifier or receiver, in addition to adjusting the volume. Therefore it eliminates the need for a speaker selector or for impedance matching equipment.

Impedance: Variable from 1-8 ohm
Rotary volume control and speaker on/off
IR receiver
LED indicator for source component with on/off status
Impedance matching
Fits standard face plates

[ click for larger view ]

Specifications:

Power handling: 300 watts max/ 100 watts RMS continuous
Input impedance: Config. to 1x, 2x, 4x, or 8x impedance matching
Quick connect terminals: Accepts up to 12-gauge wire
Attenuation: 12 steps including off
Total attenuation: 54 dB
Frequency response: 20 Hz ~ 20 KHz ±2 dB at rated power
Mounting: fits most single-gang junction boxes
Dimensions: 42 (W) x 103 (H) x 103 (D) mm
Weight: 456 g
IR component:
- Receiver frequency: 34 KHz to 40 KHz
- Transmit frequency: 34 KHz to 40 KHz
- Range on-axis: 55 ft. to 80 ft.
- Range off-axis: 30 ft.
- Main power: 12 V DC 31 mA max
- Status power: 12 V DC 3 mA max
- Wire requirements: 2 twisted pair, with or without shield

Associated product:
PRO1183 PRO2 IR repeater kit

2 WAY STEREO SPEAKER SWITCH

Switch an audio source from Speaker Set A to Speaker Set B or Combine Both (A+B Speakers ), without overloading the trasistor output stages. This can be useful if you have speakers wired to another area in your home but have one audio source.

Features

1 input to 2 outputs
Select Speaker Set A, B or A+B (please check for impedance compatibility with your amplifier when using A+B)
Left (+/-) & Right (+/-) screw terminals for amplifier input
Select output to speakers set 1, speaker set 2, or both sets at the same time
10 watts per channel
1 Speaker on, 2 Speakers on OR All Speakers on
Designed with non-shorting selector switch so you can select between two speaker systems without overloading the output stages

Specifications

Audio power handling: 10 watts/ channel continues music power
Frequency response: 0.1 dB, from 20 Hz to 20kHz

Note: Impedance restriction for total speakers is 4 ohm. Therefore, you should ensure your system or amplifier will accept a 4 ohm load at the speaker output. Please find impedance chart from user manual at download section

100V/100W PA VOLUME CONTROL

Specifications:

1. Audio power handling: 100 watts rms/channel

2. Frequency: from 20Hz to 20kHz

3.Attenuation: 12 positions control

4. Wire connector type: screw type, wire range from 14awgto 22awg

5. Dimensions: 149mm (length)* 87mm (width)* 50mm (depth)