Discontinued
Features
The HDMI extender includes two units: transmitter & receiver units. The Transmitter is used to capture the inputHDMI signals and carries the signals through two RJ-45 connectors into two low cost CAT6 cables. The receiver is responsible for equalizing the sent TMDS multimedia data.
We recommend the use of our DOSS TWIN CAT5E cable. It is insulated in a Black PVC Jacket and contains 2x CAT5E cables.
This is great for dual CAT5 HDMI Extenders as one cableis easier to install than two, and unique colouring allows easy identification of data lines.
45M 1080p HDMI OVER DUAL CAT6 EXTENDER
Features
- Easy to use: Install in seconds, no need for advanced settings adjustments.
- One pair (transmitter and receiver) supplied as a fullfunctional module.
- Use UTP LAN cable (CAT6) to substitute HDMI cable to achieve long distance transmission.
- UTP cable termination follows the standard of IEEE-568B.
- Transmission distance reaches up to 45 metres under the video format of 1080P.
- LED indicators to show the power and video signal status.
- HDCP compliant.
Specifications
- Transmission Length: 45m MAX @ 1080P
- Compression Rate: 2.25Gbps
- Operating Temperature Range: -15 to +55°C (-41 to +95°F)
- Operating Temperature Range -5 to +35°C (-41 to +95°F)
- Operating Humidity Range: 5 to 90 % RH (no condensation)
- Input Video Signal: 5 volts p-p (TTL)
- Power Supply: 5VDC
- Dimensions (WxHxD): 83mm x 46mm x 23mm
- Weight: 0.22 Kg
FAQs
Q: The description says it uses CAT6 cable, but you recommended CAT5e cable – what’s the deal?
A: Over 40m there is not a big difference between CAT5e and CAT6 cable. Not to mention the built-in electronics of the HDMIC6 compensates for signal transmission losses etc. So inshort, CAT5e cable will work just fine – plus it’s cheaper!