Browsing AV ACCESSORIES

ADM5 ANALOGUE DEMODULATOR COMPOSITE

The ADM5 offers the perfect solution for all your LCD, PDP and projector to be a multi-media display. It also lets you turn any display into a high definition full screen TV and multi-media display centre. The ADM5 offers multiple video input/​output connections compatible with modern equipment like DVD players, digital cameras, game consoles and more…

Features:

  • 1920×1200, 1920×1080 Support
  • PIP (Picture in Picture)
  • POP (Picture on Picture)
  • Supply High Resolution
    • Compatible with monitors, LCD and projectors with resolutions up to 1920×1200 for 24bit RGB true color.
  • System Support
    • Supports the following TV systems: NTSC, PAL-I, PAL-D/​K, PAL-B/​G, SECAM-L, SECAM-D/​K and SECAM B/​G
  • Great TV Video Technology
    • Supports de-interlace and progressive scan
  • Superior Noise Reduction
  • Video Entertainment on your PC
    • Supports: RF, S-Video, Composite RCA, VGA
  • Easy to use remote control
  • Auto Scanning
    • All channels scan of TV broadcast ad cable TV channels. Also supports full channels with fine tuning function
  • Sleep timer
  • Back Mounting

Specifications:

Frequency 55.25~801.25MHz (NTSC) / 48.25-855.25MHz (PAL)
Connector
Input 75 ohm Coaxial TV antenna/​cable
S-Video
One composite video, RCA left/​right for Audio in
3.5mm Audio (from sound card)
15-pin H-D female connector (from VGA card)
Output Video Output
3.5mm Audio Jack (to speaker)
15-pin H-D female connector (from VGA card)
Power DC-In Jack
Controls
Physical POWER, INPUT, CH+, CH-, VOL+, VOL-
OSD RE-SET, TINT, Brightness
Remote Control 24-Key IR Remote Control
Video Output Mode
Resolution@refresh rate 800 x 600 @60Hz
1024 x 768 @ 60Hz / 75Hz
1280 x 720 @ 60Hz / 75Hz
1280 x 1024 @ 60Hz / 75Hz
1440 x 900 @ 60Hz / 75Hz
1600 x 900 @ 60Hz
1680 x 1050 @ 60Hz
1920 x 1080 @ 60Hz
1920 x 1200@ 60Hz
Power
Input 100-120 VAC, 60Hz 220-240 VAC, 50Hz
Output 5 Vdc / 1A (U.L, CE)
Type Power Adapter
Regulations FCC Class B, CE
Accessories Main unit, plastic stand, remote control
AC/​DC adapter, VGA cable, audio cable
AAAx2 batteries, Manual

RFD2169IR RF MODULATOR WITH IR RETURN

Features

Distribute your AV equipment to multiple TVs through yourhome using RF Coaxial cable! Due to the digital switch-over, many analogue TV channels will be available to utilize, so you can insert your AV source through this modulator feed into your existing home RF distribution network. With IR return function, you can even control your AV device withouthaving to be in the same room or leaving cabinet doors open.The IR signal from your existing remote is modulated throughthe RF distribution network back to modulator where it is re-trasmitted via the adjustable IR emitter.

  • RCA Input and Loop-out
  • Channel Adjustment (Up/​Down button)
    • LED Channel Number display
  • PAL Antenna Input/​Output
  • IR Return—control your AV equipment with the original remote
    • Adjustable and self-adhesive IR Emitter and Target
  • DC power supply included

Package includes

  • RFD2169IR Main unit x1
  • IR Emitter x1
  • IR Tx Unit x1
    • With fixed IR Receiver
  • AC/​DC Adaptor x 1
    • 12V DC / 250mA
  • RF cable x2
    • PAL Plug to Socket

Specifications

.rpg_table { border-collapse: collapse; margin: 15px; } .rpg_table th, .rpg_table td { padding: 5px; line-height:22px !important; } .rpg_table td, .rpg_table th { text-align: left; vertical-align: top; border-top: solid 1px #cccccc; border-bottom: solid 1px #cccccc; } .rpg_table th, .rpg_table .header { font-weight: bold; text-align: left } .rpg_table th[align=center], .rpg_table td[align=center] { text-align:center !important; } .rpg_table .spacer { border: 0 !important; width:15px !important; } .rpg_table .no-wrap { white-space: nowrap !important; }
Main Unit Input 45~862 MHz
Input Connector PAL (IEC) Female, 75 Ω
Output CH 21~69
Output (combined) 45~862 MHz,
10~20 MHz (IR return)
Output Level 75 ± 5dBµV
Output connector PAL (IEC) Male, 75 Ω
AV Input RCA
AV Output RCA Loop through
Video Input impedance 75~1.3 kΩ
Video Input Level 1 Vpp
Video S/​N 42dB min
Audio Input impedance 10 kΩ
Audio Input Level 0.4V
Powering 12V DC
IR Output 2.1mm mono jack
Adjustable IR Emitter
IR carrier frequency 30~60 kHz
IR RF frequency 7 MHz
IR Receiver IR carrier frequency 30~60 kHz
IR RF IF frequency 7 MHz
IR RF Output level 40dBmV
IR RF Distance 100m (Maximum)

Downloads

RFMX3 3 INPUT RF MODULATOR

RFMX3 INPUT RF MODULATOR

Specifications:

  • Triple Audio/​Video Input, modulation & mixed output
  • Digital display for UHF/​CATV channels & UHF/​CATV status
  • LED indication triple AV Input
  • Channels up/​down selecting by buttons
  • UHF/​CATV channels selecting by slide switch
  • RF Output level adjustment
  • TV system: PAL G/​I/K
  • Video input: 1Vpp@75Ω
  • Audio input: 0.775V@10kΩ
  • RF output channel: CH21-CH69
  • RF output level: 84dBμVmax (Picture Carrier), 0~-15dB adj.
  • Audio Sub-carrier: 5.5MHz
  • Audio Carrier O/​P Level: 12dB
  • Video Input Port: RCA Jack
  • Audio Input Port: 3.5mm Stereo Jack
  • RF Out Port: F- (f)
  • Power Supply: 9V DC 300mA
  • Small and compact aluminum housing design
  • High stability PLL technology

Related Products

RFMX3IR 3 INPUT RF MODULATOR

Features

With Analogue TV broadcasts shutting off very soon, upgrade your existing TV and AV distribution system without buying new TVs or having to install multiple Digital STBs. Simply install and configure one digital receiver, and distribute it to your existing analogue TVs.

With room for two more AV sources, you can connect a DVD player and Digital Media Player—perfect for home installations—or a further two digital receivers for commercial installations where each STB can provide one digital channel for each modulated analogue channel.

With the correct know-how it is also possible to connect multiple TVs and even multiple modulators via DC+IR passing Splitters/​Combiners. You can even inject the modulator output into your existing antenna feed if you use the correct combination of splitters/​combiners and DC/​IR blockers. Please seek advice if you are intending to use theRFMX3IR in this way.

  • Convert and transport 3x Analogue AV sources over RF
  • IR Return allows you to control your source devices from the viewing rooms
    • Works with Foxtel iQ2
  • Each source transmitted on individually configurable UHF Channels

Specifications

  • TV system: PAL G/​I/K and NTSC
  • Frequency range: 470~862MHz, NTSC: 470~885MHz
  • Max. Output level: 85dBuV
  • RF output channel: CH21-CH69
  • Video Input Port: RCA Jack
  • Audio Input Port: 3.5mm Stereo Jack
  • RF Out Port: F- (f)
  • Remote Control Frequency: 10.7MHz
  • IR Carrier Frequency: 32~38KHz
  • Power Supply: 7.5V DC 300mA
  • Small and compact aluminium housing design
  • High stability PLL technology
  • Remote control the A/​V source with IR extender
  • Convert audio/​Video signal into TV signal

Related Products

RFMX3IRST SPARE TARGET FOR RFMX3IR

Spare IR Receiver and inserter for RFMXIR

Specifications:

  • TV system: PAL G/​I/K and NTSC
  • Frequency range: 470~862MHz, NTSC: 470~885MHz
  • Max. Output level: 85dBuV
  • RF output channel: CH21-CH69
  • Video Input Port: RCA Jack
  • Audio Input Port: 3.5mm Stereo Jack
  • RF Out Port: F- (f)
  • Remote Control Frequency: 10.7MHz
  • IR Carrier Frequency: 32~38KHz
  • Power Supply: 7.5V DC 300mA
  • Small and compact aluminum housing design
  • High stability PLL technology
  • Remote control the A/​V source with IR extender
  • Convert audio/​Video signal into TV signal

Related Products

PRO1161 100W 12-STEP VOLUME WITH IR

Volume Control with IR Receiver

The PRO1161 is a wall mount stereo speaker-level volume control with built-in IR receiver. It connects between the speaker outputs of an amplifier or receiver and a pair of speakers.

The PRO1161 matches thes the minimum output impedance of the amplifier or receiver, in addition to adjusting the volume. Therefore it eliminates the need for a speaker selector or for impedance matching equipment.

  • Impedance: Variable from 1-8 ohm
  • Rotary volume control and speaker on/​off
  • IR receiver
  • LED indicator for source component with on/​off status
  • Impedance matching
  • Fits standard face plates

side view
[ click for larger view ]

Specifications:

  • Power handling: 300 watts max / 100 watts RMS continuous
  • Input impedance: Config. to 1x, 2x, 4x, or 8x impedance matching
  • Quick connect terminals: Accepts up to 12-gauge wire
  • Attenuation: 12 steps including off
  • Total attenuation: 54 dB
  • Frequency response: 20 Hz ~ 20 KHz ±2 dB at rated power
  • Mounting: fits most single-gang junction boxes
  • Dimensions: 42 (W) x 103 (H) x 103 (D) mm
  • Weight: 456 g
  • IR component:
    • Receiver frequency: 34 KHz to 40 KHz
    • Transmit frequency: 34 KHz to 40 KHz
    • Range on-axis: 55 ft. to 80 ft.
    • Range off-axis: 30 ft.
    • Main power: 12 V DC 31 mA max
    • Status power: 12 V DC 3 mA max
    • Wire requirements: 2 twisted pair, with or without shield

Associated product:
PRO1183 PRO2 IR repeater kit

Related Products

PRO1191 60W 6-STEP VOLUME ATTENUATOR

PR O1191 60W VOLUME CONTROL 6 STEPS

Specifications:

  • Clipsal style 6 step volume controller wall plate
  • For 4, 8 or 16 ohm
  • Power handling: 60 Watts
  • Switch: 6 position rotary switch
  • 6dB per step
  • Dimension: 114 mm x 75mm x 43 mm

PRO1235DSWP WALL PLATE RECEIVER FOR

PRO1235DSWP PLATE RECEIVER FOR PRO1235D

Spare receiver for PRO1235D in wall plate type, it includes the IR target in the box.

Features:

  • Allows you to add more zones to your existing CAT5 AV distribution set up
  • Receives composite video and stereo audio signals fromthe PRO1235D distribution hub
  • Transmits IR signals to remotely control AV devices
  • Power LED
    Receives power via CAT5 connection with hub

Connections:

  • Composite video input (1x RCA)
  • Stereo audio (L / R) output (2x RCA)
  • 1x IR receiver input (3.5mm jack)

Contents:

  • PRO1235DSWP
  • Dual band IR receiver

Related Products

PRO1235D AV DISTRIBUTION OVER CAT5

but The IR Emitter has to be plugged in IR Link Socket (not from socket 1,2,3)

Distribute composite video and stereo audio plus IR signals using economical CAT5 cable. The PRO1235D is a readyto go kit including a receiver. The system can be expanded up to 4 zones with additional PRO1235DS spare receivers, also available separately.

Please note: For Foxtel IQ2 compatibility, please ensure you use the IR LINK socket for the IR emitters.

Specifications:

  • Designed to be surface mounted for in-wall composite video, and stereo audio with IR control applications
  • Transmission distance:
    • Audio: 300 meters
    • Video: 300 meters
  • Interface:
    • 3.5mm mini socket (for emitters)
    • 3x RCA connectors (for audio/​video)
    • 4x RJ45 (for CAT5)

    • PRO1235D back

  • Dimension: 157 mm x 65mm x 29mm
  • Power supply: 12VDC, 200mA
  • Loop-out function

Kit includes:

  • PRO1235 AV + IR distribution hub
  • PRO1235DS Spare AV + IR receiver
  • Single IR emitter
  • Dual IR emitter
  • IR receiver stick
  • 12V 1.2A switchmode power supply

Related Products

PRO1247D 4 ZONE HDTV + IR OVER CAT5

Features


*See “Tips” for more information

The PRO1247D allows you to extend component video, coaxial digital audio, stereo audio and IR signals to 4 different zones (expandable up to 8 with loop out function) using economical CAT5e cable.

Your source AV device (beg. DVD player) connects to the distribution hub and a 2 CAT5e cable connection is made to the receiver which is connected to your display device (beg.TV).

Features:

  • Four zone Audio / Video + IR distribution
  • Loop out function
  • Send HD video and audio signals up to 120 metres
  • Transmit IR signals to remotely control AV devices
  • IR confirmation and power LED
  • Supports 480p / 1080i
  • Both distribution hub and receiver can be wall mounted (screws included)

Specifications

Connections:

  • Distribution hub:
    • 8x RJ45 ports
    • YPbPr video input (3x RCA)
    • Coaxial digital audio (DA) input (1x RCA)
    • Stereo audio (L / R) input (2x RCA)
    • 3x IR emitter input (3.5mm jack)
    • 2x IR link connector (3.5mm jack)
  • Receiver:
    • 2x RJ45 ports
    • YPbPr video output (3x RCA)
    • Coaxial digital audio (DA) output (1x RCA)
    • Stereo audio (L / R) output (2x RCA)
    • 1x IR receiver input (3.5mm jack)

Specifications:

  • Video nominal input level: 1 Volt (peak to peak)
  • Video input impedance:
    • Distribution hub: 75 ohm
  • Video output impedance:
    • AV CAT5 receiver: 75 ohm
  • Audio input impedance:
    • Distribution hub: 47k ohm
  • Audio output impedance:
    • AV CAT5 receiver: 300 ohm
  • Power: 12V DC 1.2A switching power
  • Weight:
    • Distribution hub: 460gr
    • Receiver: 310gr
  • Dimensions:
    • Distribution hub: 195 (W) x 87 (D) x 27 (H) mm
    • Receiver: 158 (W) x 67 (D) x 31 (H) mm

Kit Contents

Kit includes:

  • Distribution hub
  • Receiver
  • Dual band IR receiver
  • Single IR emitter
  • Dual IR emitter
  • 12V DC 1.2A switch-mode power supply
  • 8x screws for mounting
  • Instructions

Installation & Tips

Tips

Getting Foxtel iQ2 to work with the PRO1247D:
Although undocumented, several of our customers have had success controlling their Foxtel iQ2 boxes via the IR extender function of the PRO1247D by connecting their IR Emitter to the IR LINK port rather than the emitter output port.

Installation diagram

PRO1247DSdiagram

Related Products