• Foxtel Compatible
  • Receive Frequency Range: 34 KHz ~ 60 KHz
  • Transmit Frequencies: 38 KHz ~ 56 KHz
• Range:
  • 12 meters (40 ft) @ 38 KHz
  • 7.6 meters (25 ft) @ 56KHz
• Power: 12V DC 30mA max.
• 45 (L) x 14 (W) x 13 (H) mm
• Cord Length: 3 meters (10 ft)
• Connector Type: 3.5mm TRS mini plug
• Weight: 28 g

PRO1188A IR Distribution over coax kit

This kit allows IR signals to be inserted onto a coax cable in one location and extracted from coax on another location.

We are all familiar with infra-red remote controls because we use them to operate our TV, DVD players etc. on adaily basis. However, you might not be familiar with "IR repeating." IR repeating allows you to control devices that are not with in the direct line of sight of your remote control. This kind of a system is commonly used in distributed audio / video systems where the source components are centrally located, or when you wish to control your source devices remotely from an entirely different location.

• Creates an IR system with existing wiring
• Power 4 IR receivers with one power supplied (included)
• Quick and easy installation

• IR injector
  • Passes the TV signal from input to output
  • Injects the signal from the infrared receiver to the side of the injector that goes "upstream" to the coupler
  • Connects power from the power supply to the infrared receiver
• IR coupler
  • It passes the TV signal from input to output
  • It extracts the infrared signal from the downstream injector to drive one or more infrared emitters
• Dual IR emitter (also sold seperately PRO1142/​37168732)
• Mini sticker IR receiver
• 12V DC 200mA power supply

Does the IR target work with plasmas?
Some plasmas are better shielded than others. In the one instance that we’ve tested the IR targets, it has worked without any issue.

How come you need to buy "special" IR passing splitters when using this product?
The special thing about IR passing splitters (eg ChannelPlus branded splitters) is that they allow voltage to pass in both directions. Standard splitters, with their internal diode, only allow voltage to pass up the splitter. Since IR systems require this voltage to also be passed down the splitter also, you how to ensure that you choose the correct model.

• Spare receiver for PRO1188A, it includes PRO1186 IR injector and PRO1178 mini IR receiver
• Dimension: 47mm x 35mm x 20mm

Does the IR target work with plasmas?
Some plasmas are better shielded than others. In the one instance that we’ve tested the IR targets, it has worked without any issue.

How come you need to buy "special" IR passing splitters when using this product?
The special thing about IR passing splitters (eg ChannelPlus branded splitters) is that they allow voltage to pass in both directions. Standard splitters, with their internal diode, only allow voltage to pass up the splitter. Since IR systems require this voltage to also be passed down the splitter also, you how to ensure that you choose the correct model.

• Suits IR Receivers with 3.5mm connectors
• Colour: Black

• Socket module: 3.5mm Stereo Jack
• Wire range: 20-26 AWG
• Dimensions (mm): 42L x 19.3W x 24H
• Weight: 9g
• IR operate off 12 VDC and include three connections on their rear:
  – IR output signal
  – +12 VDC
  – Ground
  

The Pro2 IRE12 transmitter takes the standard IR signal from your existing remote controls and converts it to the more powerful and reliable RF frequency. The wireless receiver then converts those RF signals back to IR and allows you to control your equipment behind cabinets, even in another room!

• IR Remote control Extender via UHF
• Control any audio/​video equipement through walls
• Carrier Frequency: 433.92MHz
• Maximum range: 50m line-of-sight
• Supports multiple IR Transmitter units: IRE12SPT

• 1x Transmitter
• 1x Receiver
• 2x 9V power supply
• 3-way IR beamer
• User manual

Download the Pro2 IRE12 User Manual (PDF file)

What does it mean when the red LED on the front of theIRE12 Transmitter flashes?

The LED remains constant but flashes when receiving a RF signal from receiver only.

What does it mean when the red LED on the front of theIRE12 Receiver flashes?

The LED only flashes when receiving an IR signal from the remote.

The Led on the IRE12 Receiver keeps flashing by itselfand seems unresponsive, what’s wrong?

You’re probably having IR interference in the room. Make sure the Receiver is not pointed at a computer LCD screen, fluorescent lamps, plasma TV as they might be producing IR emissions.

The Pro2 IRE12 transmitter takes the standard IR signal from your existing remote controls and converts it to the more powerful and reliable RF frequency. The wireless receiver then converts those RF signals back to IR and allows you to control your equipment behind cabinets, even in another room!

Transmitter only: see IRE12 for full set (incl Receiver)

• Carrier Frequency: 433.92MHz
• Maximum range: 50m line-of-sight

• 1x Transmitter
• 1x 9V power supply

New – Works with Foxtel

The AWX710SPT remote control transmitter uses RF technology to transmit infra-red signals through walls, floors, and ceilings, allowing you to control your source devices from an extra room.

• Transmitter only
  – You will need at least one AWX710 receiver for the AWX710SPT to work

Specifications

• IR Extender Transmission: Effective Range up to 35m
• IR Extender Transmission Frequency: 433.9 MHZ +/​- 250KHz
• Power Supply: 12 V DC, 150 mA – 230-240 V AC / 50Hz (Included)

Insert your favorite video program, such as DVD, Satellite Receiver, Digital Set Top Box etc. to a TV withoutRCA connector through this RFD2169BF Video RF Modulator and you can also share to several TV’s in your home through your RF distribution network.

• High power RF output: 72dBuV ±5dB
• SCART Input/​output and 1 RCA input
• Antenna input
• Antenna output (TV)
• DC power supply input
• ON/​OFF switch
• Channel Adjustment (Up/​Down key)
• LED Channel Number display

• RF Input: 45~862MHz
• Input Connector: F Female,75 Ohm
• Output: CH 21-69
• Output (combined): 45~862MHz
• Output connector: F Female,75 Ohm
Video & Audio
• Input: RCA/​SCART
• Output: SCART (Loop Through)
• Video Input impedance: 75~1.3K ohm
• Video S/​N: 40dB min
• Audio Input impedance: 10K
• Ohm Powering: 9V

DC Accessories:

• AC Adaptor x 1: 240VAC (9V DC @ 200mA)
• RF Cable: F Male—>IEC Female @1m