BNC Socket to ‘F’-type Socket (straight-through) modular insert
- To suit Clipsal wall plates
Browsing WALL PLATE MECHS
Flexible USB3.0 Insert to suit Clipsal blank modular wall plates. Ideal for tight spaces in wall cavities, or where cable approach makes it difficult or impossible to connect to socket. Allows cable to move and hang in its natural position without pulling out or putting unwanted pressure onthe wall plate or socket.
- Gold plated connectors
- Approx 10cm lead
- Flat lead for maximum flexibility
HDMI Socket to HDMI Socket (right-angle) modular insert
- Gold plated connectors
- To suit Clipsal wall plates
HDMI Socket to HDMI Socket (straight-through) modular insert
- Gold plated connectors
- To suit Clipsal wall plates
Flexible HDMI Insert to suit Clipsal blank modular wall plates. Ideal for tight spaces in wall cavities, or where cable approach makes it difficult or impossible to connect to socket. Allows cable to move and hang in its natural position without pulling out or putting unwanted pressure onthe wall plate or socket.
- Gold plated connectors
- Approx 10cm lead
- Flat lead for maximum flexibility
Features
Our keystone modules provide a full range of solutions for voice, home networking, home office, audio/​video and more. With the wide selection of snap-in modules, you can custom-configure your keystone wall plates and patch panels for greater control and more flexibility.
This HDMI keystone insert enables you to hide your expensive premium HDMI cables behind the wall plate and use normal HDMI cables to connect to your devices. Eliminate thehassle of damaging main HDMI input by frequently pluging andunpluging HDMI cable when you swap devices. Snap-in design makes it easy to install on your keystone wall plate.
Suits perfectly on our MWI13KS keystone wall plate module.
Specifications
1. Current Rating: DC 1A
2. Withstanding Voltage: DC 300VDC,10ms
3. Insulation Resistance: 10M ohm
4. Conductive Resistance: 2 ohm
5. Insertion Loss<0.2dB (DC to 150MHz)
6. Through Loss<0.2dB (DC to 150MHz)
7. Material of Cover: ABS
2. Withstanding Voltage: DC 300VDC,10ms
3. Insulation Resistance: 10M ohm
4. Conductive Resistance: 2 ohm
5. Insertion Loss<0.2dB (DC to 150MHz)
6. Through Loss<0.2dB (DC to 150MHz)
7. Material of Cover: ABS
Features
This Dual Band Mini IR Receiver fits perfectly into our MWI13KS keystone wall plate modules. It allows for the discrete placement of an IR receiver without the bulkiness of other receiver units.
|
Receive frequency range
|
34kHz to 60kHz
|
|
Transmit frequencies
|
38kHz & 56kHz
|
|
Range
|
40ft.@38KHz
25ft.@56KHz |
|
Power
|
12VDC, 30mA max
|
|
Connector type
|
12VDC, 30mA max
|
|
Wire range
|
20-26 AWG
|
|
Weight
|
8.5g
|
Features
This 3.5mm keystone module snaps into standard keystone wall plates to allow you to connect external IR receiver wire into the IR control system. 3.5mm modules are easy to connect to UTP cable; simply push the terminal and insert the wire.
Fits perfectly into our MWI13KS keystone wall plate modules.
Specifications
|
Socket Module
|
3.5mm Stereo Jack
|
|
Connector Type
|
Spring Clamp Terminal Block
|
|
Wire Range
|
20-26 AWG
|
|
Dimensions
|
42L*19.3W*24H mm
|
|
Weight
|
9g
|
Features
This 3.5mm keystone module snaps into standard keystone wall plates to allow you to connect IR emitter wire into theIR control system. 3.5mm modules are easy to connect to UTP cable; simply push the terminal and insert the wire.
Fits perfectly into our MWI13KS keystone wall plate modules.
Specifications
|
Socket Module
|
3.5mm Stereo Jack
|
|
Connector Type
|
Spring Clamp Terminal Block
|
|
Wire Range
|
20-26 AWG
|
|
Dimensions
|
42L*19.3W*24H mm
|
|
Weight
|
9g
|