HDC6EDID HDMI OVER SINGLE CAT6 EXTENDER (Discontinued)

Features

A neat and simple high definition HDMI extender kit. This kit extends your high definition AV sources from Blu-ray DVD Players, PS3 and XBOX etc. up to a maximum 50m via single solid CAT5E / 6 cables through the wall cavities. The new EDID feature increases its compatiblilty with players or displays. It supports full 1080P high definition and integrates an infra-red control extender for full controllability from the receiving end. RJ45 connections on the rear of both units make it for easy connection.

Foxtel iQ2and iQ3 compatible
  • Transmits HDMI Audio/​Video Signals and IR over a 50m single solid Cat5e/​6 Cable.
  • Transmits a wide-band Bi-Directional IR control signal together with the HDMI signal.
  • Supports 24bit Deep Colour.
  • Full cascade to create larger distributions.
  • Automatically adjusts feedback, equalization and amplification
  • EDID DIP switch on Transmitter to enhance EDID communication between sources and displays
  • With adjustable EQ for optimizing the transmission signal
  • Supports PCM, Dolby Digital, and DTS Digital Surround
  • Follows IEEE-568B cable termination standards, solid cables are prefered
  • HDCP compliant
  • Supports 3D video format
Got the right cable?

Please note: IEEE-568B standard solid cables are recommended for this kit.

Wiring Diagram

Specifications

What are included in the package?

  • 1xHDMI Transmitter
  • 1xHDMI Receiver
  • 2 x IR TX Emitter
  • 2 x IR RX Receiver
  • 2 x 5V / 1A DC Adapter (Australian approval)
  • User Manual
Transmission Distance 1080p up to 50m*
Operating Temperature Range −5 to +35°C
Operating Humidity Range 5 to 90% RH (No Condensation)
Data transfer speed 6.75Gbps
Connectors HDMI Receptacle x 2
RJ45 Receptacle x 2
Power DC Receptacle x 2
3.5mm stereo Receptacle x 2 (for IR TX and RX cable)
Resolution outputs 1080p/​1080i/​720p/​576p/​480p/​576i/​480i
Video colour bit supported 24bit
Audio format supported DTS-HD Master Audio, Dolby True HD, multi-channel 5.1, stereo etc
Output Video Signal HDMI + HDCP
Dimensions (HxWxD) 65 x 24.1 x 85mm
Power supply 5V DC Power supply (Included)
Power consumption 1.5W (MAX) (TX:0.5W, RX:0.3W)
Net Weight 319g
IR wavelength & frequency Wavelength: 940nm IR Frequency: 38KHz – 56KHz

*Note: 50m distance is under perfect transmission conditions including straight cable runs with no electrical interference, bends, kinks, patch panels or wall outlets.

FAQ

Does this unit work with the new Foxtel iQ3?
Yes. Just make sure your IR emitter is placed in the correct location. See the image below.

Why is it not working well as it suppose to?
Please make sure IEEE-568B type solid cable is being used.

HDC6L HDMI OVER SINGLE CAT6 EXTENDER

Features

An upgraded version of our HDC6EDID. Now with local HDMI loop out on transmitter device enables local viewing function. Which means you can view the video source locally as well as on the extended end.

A neat and simple high definition HDMI extender kit. This kit extends your high definition AV sources from Blu-ray DVD Players, PS3 and XBOX etc. up to a maximum 50m via single solid CAT5E / 6 cables through the wall cavities. The new EDID feature increases its compatiblilty with players or displays. It supports full 1080P high definition and integrates an infra-red control extender for full controllability from the receiving end. RJ45 connections on the rear of both units make it for easy connection.

Foxtel iQ2and iQ3 compatible
  • Transmits HDMI Audio/​Video Signals and IR over a 50m single solid Cat5e/​6 Cable.
  • Transmits a wide-band Bi-Directional IR control signal together with the HDMI signal.
  • Supports 24bit Deep Colour.
  • Full cascade to create larger distributions.
  • Automatically adjusts feedback, equalization and amplification
  • Supports PCM, Dolby Digital, and DTS Digital Surround
  • Follows IEEE-568B cable termination standards and solid cables are prefered.
  • HDCP compliant
  • Supports 3D video format
  • HDMI out port on transmitter
Got the right cable?

Please note: IEEE-568B standard solid cables are recommended for this kit.

Wiring Diagram

Specifications

What are included in the package?

  • 1xHDMI Transmitter
  • 1xHDMI Receiver
  • 2 x IR TX Emitter
  • 2 x IR RX Receiver
  • 2 x 5V / 1A DC Adapter (Australian approval)
  • User Manual
Transmission Distance 1080p up to 50m*
Operating Temperature Range −5 to +35°C
Operating Humidity Range 5 to 90% RH (No Condensation)
Data transfer speed 6.75Gbps
Connectors HDMI Receptacle x 2
RJ45 Receptacle x 2
Power DC Receptacle x 2
3.5mm stereo Receptacle x 2 (for IR TX and RX cable)
Resolution outputs 1080p/​1080i/​720p/​576p/​480p/​576i/​480i
Video colour bit supported 24bit
Audio format supported DTS-HD Master Audio, Dolby True HD, multi-channel 5.1, stereo etc
Output Video Signal HDMI + HDCP
Dimensions (HxWxD) 65 x 24.1 x 85mm
Power supply 5V DC Power supply (Included)
Power consumption 1.5W (MAX) (TX:0.5W, RX:0.3W)
Net Weight 319g
IR wavelength & frequency Wavelength: 940nm IR Frequency: 38KHz – 56KHz

*Note: 50m distance is under perfect transmission conditions including straight cable runs with no electrical interference, bends, kinks, patch panels or wall outlets.

FAQ

Does this unit work with the new Foxtel iQ3?
Yes. Just make sure your IR emitter is placed in the correct location. See the image below.

Why the product is not working well as it suppose to?

Please make sure IEEE-568B type solid cable is being used.

HDMIIPECO HDMI OVER ETHERNET EXTENDER

Features

HDMIIPECO uses H.264 as compression type, which takes lower bandwidth and transmits the signal over the LAN more smoothly. It transmits the HDMI signal for up to 120m over single cat5e / 6 cable at point to point, as well as point tomany and many to many over Ethernet switch. It can be widelyused in various locations, such as meeting room, class room, metro, airport, home, mall advertisement…etc.

Foxtel iQ2and iQ3 compatible
  • Use H.264 as compression type, high video quality with low bandwidth required
  • Support resolution up to 1080p @ 60Hz, data transmissionspeed is 2.25 Gbps
  • FOXTEL IQ IR compatiable
  • Real and managable IP addresses allows HDMI source can be accessed inside network via VLC player.etc. Footages can be recorded by software.
  • Dip swithc to change sources
  • Support LPCM audio format, sample rate is 48KHz
  • Comply with TCP/​IP protocol for transmission, streaming bit rate is upto 15Mbps.
  • Compliant HDCP
  • Support RS232 pass through
  • Support Wide-band IR (38k ~ 56khz)
  • Support point to point, point to many, many to point, many to many broadcasting network configuration
  • Support DHCP, switch assign IP for the Transmitter and Receiver automatically
  • With 3 Bit DIP to choose baud rate
  • With 6 Bit DIP to manage group ID
  • With HDMI output for local display on Transmitter
  • DC 5V 2A power supply, power consumption less than 3W

Specifications

    Performance
    Protocol H.264 encoder over TCP/​IP
    Support Video Format 480i / 480p / 576i / 576p / 720p / 1080i / 1080p @ 60Hz
    Support Audio format LPCM, Audio sampling rate 48KHZ
    Streaming Bit Rate 15Mbps
    HDCP Compliant
    IR Frequency 38 -56 KHZ
    RS232 Baud rate Default 2400bps, total 8 kinds optional
    IP setting & Group ID setting
    Default IP TX: 192.168.1.11; RX: 192.168.1.12
    Group ID Group 00 ~ group 63
    Request for Switch / Router Support IGMP, support DHCP
    Connectors on Transmitter
    Input 1xRJ45 input
    Output 1x HDMI Female port
    RS232 DB9 Male port
    IR IR RX port
    Environmental & Power Requirements
    Operating temperature -5 to +35 °
    Operating Humidity Range 5 to 90%RH (No Condensation)
    Power supply DC 5V 2A
    Power consumption Max 3 watt
    Physical
    Dimension 120.2×78.6×29 mm
    Net Weight TX: 0.28KG: RX:0.28KG

Package Contents

  • 1x Transmitter
  • 1x Receiver
  • 1x IR-TX
  • 1x IR-RX
  • 1x Manual
  • 2x Power adapters 5V 2A (included)

FAQ

Does this unit work with the new Foxtel iQ3?
Yes. Just make sure your IR emitter is placed in the correct location. See the image below.

How to Playback using VLC player software?

Please note VLC cannot playback videos covered by HDCP.

1. Open VLC player software and select "Media" then "Open Network Stream"

2.Select Network and IP address should be filled in

3. Select Stream in the drop down list at bottom right

4.

5.

6.

7. Click on Next to finish off streaming procedure

Related Products

HDMIIPPRO HDMI OVER IP EXTENDER WITH POE

Features

Considering extending your HDMI source over single Cat5E/​Cat6 cables?

This HDMIIPPRO HDMI over IP Extender uses advanced H.264compression type which transfers signal using lower bandwidth thus tranmit more smoothly.

It supports 120m over single Cat5E/​6 cable at point to point. It also supports point to many and many to many transmition over ethernet switch.

A great HDMI over IP solution for meeting room, class room and home etc.

The PRO version supports remote control and can be powered by POE.

  • Using H.264 compression encoding, Supports resolution up to 1080p@60Hz
  • Transmit up to 120m over single Cat5E/​6 cable with 1 looping HDMI output
  • With IR remote for source selection. LED front panel showing group ID.
  • Complies with TCP/​IP protocol, streaming bit rate is up to 15Mbps
  • Supports LPCM audio format
  • Supports DHCP for easy IP address assigning
  • By pass 2 way UART/​RS232 (Up to 115200), remote controlcan be used for selecting 8 group baud rate.
  • Supports one to one, one to many, many to one, many tomany modes.
  • Can be powered by either power supply or POE
  • HDCP compliant
  • Supports PC tool control

FAQs

I am having trouble changing IP address
Please click here for more information
What type of internet switches are ideal to be used with this product?
To ensure the best performance of HDMIIPPRO, a managedgigabit switch with IGMP (Internet group management protocol) snooping function is recommanded for many to many applications.

Packing content

1x Transmitter

1x Receiver

1x IR-TX cable

1x IR-RX cable

1x Manual

4x Mounting Screws

4x Detachable Mounting Ears

2x Phoenix Plugs For RS232 Cable Termination

2x Remote Control

2x 5V 1A Power Supplies

Specifications

Performance
Protocol H.264 encoder over TCP/​IP
Video Format 480i/​480p/​576i/​576p/​720o/​1080p@60Hz
Audio Format LPCM, Audio sampling rate 48kHz
Bit Rate 15Mbps
HDCP Yes
IR Frequency

38-56 kHz

RS232 Baud Rate Default 2400bps-8 options
IP Setting& Group ID Setting
Default IP TX: 192.168.1.11; RX: 192.168.1.12
Group ID Group 00-Group 63
Switch/​Router Requirements Supports IGMP, DHCP
Transmitter Connections
Input 1x HDMI socket
Output 1x RJ45 output, 1x HDMI looping output
RS232 Phoenix RS232 port
IR IR TX port (supports 38k-56k Hz)
IR Ext port (supports 38kHz)
Receiver Connections
Input

1x RJ45 input

Output 1x HDMI socket
RS232 Phoenix RS232 port
IR IR RX port (supports 38k-56kHz)
IR Ext port (supports 38kHz)
General
Operating Temperature -5 – 35°C
Operating Humidity Range 5 to 90% RH
Power Supply DC 5V 1A
Power Consumption Max 3 watt
Dimension TX: 119×79.5x28mm; RX: 119×79.5x28mm
Net Weight TX: 028 kg; RX: 0.28 kg

Related Products

HR02 HDMI REPEATER

Features

  • Extend HDMI signals up to 50 metres
  • Compact size
  • No need external power supply
  • Requires no user operation
  • Supports 3D video formats
  • CEC Pass-Through
  • Signaling rates up to 2.25Gbps in support of UXGA and 1080P display
  • 40dB receiver equalization

Specifications

Operating Temperature Range -5 to +35°C (+23 to +95°F)
Operating Humidity Range 5 to 90%RH (No Condensation)
Input Video Signal 0.5-1.0 Volts P-P
Signalling rates up to 2.25Gbps
Compatible Computer signal VGA, SVGA, XGA, SXGA, UXGA
Supported Audio Format DTS-HD Master Audio, Dolby true-HD etc.
Transmission Distance 0 to 50 metres over HDMI cable, 26 AWG STP
0 to 36 metres over HDMI cable, 28 AWG STP
0 to 30 metres over HDMI cable, 30 AWG STP
Auto Equalization up to 40dB at 825MHz (1.65Gbps)
Power consumption 0.7watts (Maximum)
Dimension (L×W×H) 52×36×19mm
Net Weight 16.5g
Gross Weight 34 g

HR04 HDMI2.0 4K2K REPEATER

Features

  • Bandwidth upto 18Gbps, Resolution upto 4Kx2K @ 60Hz, YUV4:4:4
  • Transmitter upto 25m under 4K@60Hz, 30m under 4K@30Hz
  • Supports 3D
  • CEC Pass Through
  • HDCP2.2/​1.4 Compliant
  • Compact size
  • Power consumption is less than 1W
  • No power supply needed

Specifications

Operating Temperature Range -5 to +35°C (+23 to +95°F)
Operating Humidity Range 5 to 90%RH (No Condensation)
Input Video Signal 0.5-1.0 Volts P-P
Input DDC Signal 5 volts p-p (TTL)
Data Transfer Speed Rate 18Gbps (Max)
Supported Video Format DTV/​HDTV:
480i/​576i/​480p/​576p/​720p/​1080i/​1080p
4Kx2K@60Hz/​YUV 4:4:4
3D video supported
Video Output HDMI
Supported Video Color Format xv-YCC/​deep color 36bit
Supported Audio Format DTS-HD/​true-HD/​LPCM7.1/​AC3/​DTS/​DSD
Power Consumption 1W (Max)
Dimension (L*W*H)

49.2*27*13.2mm

Net Weight 0.01g

HDMIFIB HDMI OVER FIBRE EXTENDER

Features

The HDMIFIB is a long-range HDMI video extender kit that uses SC fibre optic cable to extend video/​audio from an HDMI-equipped device to a remote display up to 20km away. The extender supports full High-Definition video (1920×1080/​1080p) and includes both the transmitter and receiver, for acomplete ready-to-use digital signage solution.

Not only is this an incredibly long range solution that can extend an HDMI signal across or between buildings, but because fibre optics transmit data using light rather than copper, it will not cause or be effected by electromagnetic Interference (EMI).

For convenient, time-saving control of the media source, the HDMI extender also offers Infrared (IR) extension, whichenables you to control the HDMI audio-video source from either end of the connection.

  • Extends 1080p HDMI signals up to 20km over a fibre opticcable
  • Provides high-resolution image quality
  • Plug-and-play operation – no programming or setup required
  • Ethernet Pass-Through
  • Optical fibre use rules out any RF interference

Specifications

Operating Temperature -5 to +35°C
Storage Temperature -10°C~70°C
Operating Humidity 10 to 90%RH (No Condensation)
Storage Humidity 5 to 90%RH (No Condensation)
Fibre Module 1310nm single mode, double fibre
(Transmitter + Receiver)
Ethernet Port 100M
Fibre Connector SC Duplex Connector
Transmission Distance 1080P 36bit @ 60Hz 20km (Maximum)
Power consumption TX:8watts; RX:8watts (Maximum)
IR wavelength & frequency Wavelength:940nm, frequency 38kHz
Dimension (L×W×H) TX: L154 x W99.5 x H27mm; RX: L154 x W99.5 x H27mm
Net Weight Transmitter: 410g, Receiver: 410g
LED Indicators Power, Link and Speed

Note: Specifications are subject to change without notice. Specs and dimensions are approximate.

Interface
  • Power input port
  • Reset button
  • IR-TX port
  • HDMI input
  • SC port
  • Power, Link and Speed
  • Ethernet port (100M)
Package contents
  • Main Unit. Transmitter & Receiver HDMI Extender
  • Power adapter DC 5V 2A x 2 Pcs
  • IR-TX cable & IR-RX cable
  • Operating Instructions
Simplediagram