Love your old TV and don’t want to throw it away to watchHDMI content or maybe your TV only has one HDMI input? Or doyou just want to add an HDMI source to a CBVS (composite video) distribution system with out the full upgrade? The HCS01 converts the digital HDMI signal into the old and familiar Yellow, Red and White (Composite Video/​CBVS and Stereo Audio) analogue AV signals for use with legacy AV devices.

Supporting PAL and NTSC outputs (user switchable), and HDMI signals up to 1080P, you’ll have no problem connecting your new HDMI source to your analogue equipment.

Features:

• Converts HDMI to Analogue Composite Video and Stereo Audio
• Support NTSC and PAL output formats (switchable)
• HDMI input formats supported:
  • 480P
  • 576P
  • 720P
  • 1080I
  • 1080P @ 60Hz
• HDCP support
• Inputs:
  • 1x HDMI
• Outputs:
  • 1x RCA (CBVS/​Composite)
  • 2x RCA (Audio L & R)

Please Note: the HCS01 HDMI to AVConverter will only convert Stereo PCM audio to analogue stereo output. Multi-channel and proprietary formats (eg Dolby and DTS) are not supported!

The Digital to Analog Audio Decoder uses a 24-bit / 96 kHz Digital Receiver & DSP, and a 192 kHz/​24bit ADC toconvert digital audio formats to high-quality stereo analogue audio. It supports Dolby Digital (AC3), Dolby ProLogic, DTS, PCM and other multi-channel digital audio formatsource formats. The optical or coaxial inputs allow easy connection to any equipment with digital output, and even features a 3.5mm stereo socket for connecting headphones.

• Convert DTS/​AC3 source digital audio to analog 2.0ch stereo audio output
• Multi-channel audio input (SPDIF, Coaxial)
• No need to install drivers
• Portable, flexible, plug and play

Specifications

• Input ports:
  • 1x Toslink/​SPDIF
  • 1x Coaxial
• Output ports:
  • 2x RCA (L/​R)
  • 1x 3.5mm Phone Jack
• Signal to Noise: 120 dB
• Degree of Separation: 85 dB
• Frequency Response: 20 Hz ~ 20 kHz ± 0.5 dB
• Dimensions (mm): 72 (D) x55 (W) x20 (H)
• Weight (g): 40

• Convert DTS/​AC3 source digital audio to analog 5.1ch audio output
• Expand 2.0CH Analogue audio up to 5.1CH
• Multi-channel audio input (SPDIF, Coaxial)
• Input selector button
• Output mode selector button
• No need to install drivers
• Portable, flexible, plug and play

• Input ports:
  • 2x Toslink/​SPDIF
  • 1x Coaxial
• Output ports:
  • 6x RCA (L / R / C / RL / RR / SW)
• Signal to Noise: 120 dB
• Degree of Separation: 85 dB
• Frequency Response: 20 Hz ~ 20 kHz ± 0.5 dB
• Dimensions: 105 x 75 x 25 mm
• Max Output Volt: 2.2Vp-p
• Power Supply DC/​5V 1A

• No drivers required; plug and play
• Converts HDMI to:
  • DVI-D Digital Video Signal
  • Stereo analogue audio (PCM to Analogue conversion only; no Dolby or DTS Decoding)
  • Coaxial digital (S/​PDIF)
  • supports up to 1080p/​60Hz
• 5VDC Power supply included

• Main Unit (HD02ECO)
• Power adaptor
• User Manual

The CH01 RCA Composite video to HDMI Scaler takes Composite Video as input and converts it to HDMI 720P or 1080P. It allows older analog devices to be integrated into an HD home theatre system. Plug and Play, no softwaredriver is needed. Perfect for connecting old composite video devices to a modern computer monitor via HDMI!

• Up-scales Composite Video up to full HD 1080P
• HDMI output is optional at 720P or 1080P
  • HDMI Signal includes Stereo PCM Audio
• Input video systems – NTSC and PAL is automatically detected and adjusted

• 3x RCA inputs (Left/​Right Audio + Video)
• 3x RCA outputs (Left/​Right Audio + Video)
• Mini-USB power input (5V 1A)
• PAL – NTSC switch

• PNC616 converter
• 5V 1A switch mode power supply
• 2.1mm DC socket to mini USB plug

The SC4K2K not only upscales your 1080P HDMI source to the Ultra HD 4K format, but also acts as a digital audio extractor. Your 3D 1080P HDMI signal can be left untouched while the audio is extracted for processing by your own DAC or AV receiver by using one of the 1080P by-pass modes.

Alternatively, if you’ve decided to take the plunge and buy a new 4K TV, but the image isn’t quite as good as you expected, it’s perhaps not the panel’s fault but the scalingchip your TV manufacturer chose to use. Until 4K content is more widely spread, you will be stuck with your TV poorly upscaling 1080P for your hi-res panel! Hook up the SC4K2K toscale your Full HD content to 4K format, thus avoiding the use of your TV’s low quality scaling, allowing you to enjoy your new TV the way you expected!

• User selectable operating modes:
  • 1080P 3D Pass-through with Audio pass-through
  • 1080P 3D Pass-through with 2.0CH PCM audio output
  • 1080P 3D Pass-through with 5.1CH AC3/​DTS audio output
  • Upscale 1080P to 4K with Audio pass-through
• Digital sound formats supported for extraction: PCM, Dolby Digital, DTS
  • Optical / TOSLINK output
• Supports Deep Colour 36-bit at 1080p/​60Hz resolution
• HDMI input compliant with MHL 2.0
• CEC Pass-through
• Supports HDCP
• Full 300MHz HDMI receiver and HDMI transmitter
  • Maximum transmit distance:
    15m @ 4096×2160/​30Hz resolution
    20m @ 24Hz resolution

My 4K TV shows signal error when upscaling?

Please make sure that video input is 1080p@ 24/​30Hz for SC4k2k to upscale successfully.

Signal is not stable when i make changes on dip switch.

Please unplug power supply when you make any changes on dip switch. Keep power plugged in may damage your unit.

• Compliant HDMI 1.4B.
• Converts HDCP 2.2 to HDCP1.4
• Supports 4Kx2K @ 60Hz / YUV 4: 2:0
• Supports audio format Dolby / DTS / LPCM
• Supports 3D / CEC
• Power supply: 5V 1A (included)

Your new laptop only has HDMI out but you want to use that old VGA monitor you have lying around? Convert your HDMI source to VGA with the HVY02. With dual HDMI input you can also connect a STB to your old monitor or display, and switch between inputs with ease.

• Two digital HDMI 19pin ports
• Convert HDMI input to RGB HV/​YpbPr/​YCbCr output witha 15 pin HD-sub (VGA style) jack
• Two channel input can be switched easily
• Choose RGBHV or Component (YPbPr/​YCbCr) output with aswitch
• RGB 4:4:4 (8 bits) digital input
• YPbPr 4:4:4 or YCbCr 4:2:2 digital output
• Analog stereo audio 2.0 output
• HDCP Compliant & DVI 1.0 Compliant
• Supports 1.5Gbps signaling rate
• Supports HD format from 480i to 1080p
• Blue LED light indicates the connection status
• VGA to Component lead
• Power supply and VGA to component lead included