• Four amplified emitter output connections
• convenient IR confirmation LED
• Power indication LED
• Compact size for mounting near audio equipment
• IR receiver and emitters supplied
• Compatible with Foxtel IQ2

• 1x Compact IR Repeater Box
• 1x IR Receiver (3.5mm Stereo plug)
• 2x Dual IR Emitters (3.5mm Mono plug)
• 1x Power Adapter (5VDC / 500mA)
• 2x Mounting Screws

.rpg_table { border-collapse: collapse } .rpg_table th, .rpg_table td { padding: 5px; } .rpg_table td, .rpg_table th { text-align: left; vertical-align: top; border-top: solid 1px #cccccc; border-bottom: solid 1px #cccccc; } .rpg_table th, .rpg_table .header { font-weight: bold; text-align: left } .rpg_table th[align=center], .rpg_table td[align=center] { text-align:center; }

Can I use the PRO1326 with other Pro2 accessorieslike IR hubs, IR targets and IR wall plates?
The accessories are designed to be compatible with the PRO1187 IR block but not the PRO1326. Since the Vcc output voltage from IR Receiver socket (on thePRO1326) is 5 volts (not 12 volts like the PRO1183) so you can’t connect the output of the PRO1326 to many of the otherPro2 IR accessories.

Why the IR confirmation blue LED stays on?

Please make sure IR target has been plugged in. Once plugged in, the IR confirmatino light will be off and only blinks when it receives IR signal.

IR:

• Compatible with all universal full band carrier frequency infrared remote
• Better IR receive sensitivity (distance), over 7 meter

RF:

• Long range transmission over 200 meter (open space)
• 915 MHz RF technology to ignore current 433MHz RF-interference
• FSK modulation:
  • Better signal sensitivity than ASK modulation
  • Better anti RF-interference than ASK modulation
  • Better noise suppression
  • Digital encrypted function ensures safety and reliability
  • Support one receiver to Multi transmitter

  Power supply: 5V 0.5A

Kit includes of:

• Infrared connecting block
  Connects IR receivers, power supply and emitters together to interface the IR system to the audio / video components.
  • Six emitter output connections
  • Convenient IR confirmation LED
  • Status power receptacle with LED indicator
  • 3 conductor 1/​8" receptacle for interfacingwith many brands of free standing IR receivers
  • Compact size for mounting near audio equipment
  • 82 (W) x 60 (H) x 27 (D) mm
  • 110 g
• Mini stick infrared receiver
  Receives IR signals from a handheld IR remote control and relays this signal to the audio/​video equipment for operation from another room. The receiver has a non-skid base and is placed on a flat surface.
  • CFL friendly – allows installation in areas with compact fluorescent lighting.
  • Blue IR confirmation LED
  • Wide band IR
  • 3 m cable with 3.5 mm stereo mini plug
• Infrared emitter
  • Round shape, with elegant & compact size
  • Transparent housing
  • 10ft cable length
  • 3.5mm standard mono plug
  • With self-adhesive tape for quick and easy fixing on any hard, clean and dry surface
• 12 V 200 mA power supply

Click for a larger version

Wired connection from the PRO1178A to the connecting block
Click for a larger version

• Foxtel Compatible
  • Receive Frequency Range: 34 KHz ~ 60 KHz
  • Transmit Frequencies: 38 KHz ~ 56 KHz
• Range:
  • 12 metres (40 ft) @ 38 KHz
  • 7.6 metres (25 ft) @ 56KHz
• Power: 12V DC 30mA max.
• 45 (L) x 14 (W) x 13 (H) mm
• Cord Length: 3 metres (10 ft)
• Connector Type: 3.5mm TRS mini plug
• Weight: 28 g

What are the distance restrictions when running IR from this device?

We tested the Pro1183 IR block to the Pro1140 Inwall IR receiver. Between the devices, we used 50m of Pro2 patch leads and a total of 3 cat5e joiners (TEL5011) to simulate wall plates. The signal was passing reliably between the devices.

The PRO1255 IR repeater wall plate kit connects the IR connecting block, IR receiver, IR emitter, and power supply together to interface the IR system to Audio/​Video components.

With this setup, you are able to remotely control AV devices in different locations. Wall plates mount to a standard signle gang electrical box using deco cover plates.

In-wall IR Connecting Block

• Three emitter output connections
• Convenient IR confirmation LED
• Status power connector with LED indicator
• Power input connector with LED indicator
• Large detachable IR receiver connection at back
• Specifications:
  • Dimensions: 70 (W) x 114 (H) x 40 (D) mm
  • Weight: 56gr

In-wall IR Receiver
Receives IR signals from a handheld IR remote control and relays this to the AV equipment for operation from another room.

• Dual colour LED (Green for system status / Blue for talk back)
• Ultra-thin design mounts to any J-box or P-ring
• Wide band IR receives signals from many types of remotes
• Specifications:
  • Receive frequency range: 34 KHz to 40 KHz
  • Transmit frequency: 38 KHz
  • Range:
    On axis: 16.8m to 24.4m
    30° off axis: 9.1m to 16.8m
  • Power: 12 V DC, 30mA max.
  • Status Power: 12 V DC, 3mA max.
  • Dimensions: 70 (W) x 114 (H) x 16 (D) mm
  • Weight: 36gr

Kit includes:

• In-wall IR Connecting Block
• In-wall IR receiver
• Dual IR emitter
• Single IR emitter
• Switch mode power supply

Q: Can I add extra IR receiver in other room? How many and how?

A: Yes, you can add 2 extra receivers in the system, total up to 3 IR receivers are suggested for the system, thewiring diagram is on page 4 of the manual.

• Foxtel Compatible
  • Receive Frequency Range: 34 KHz ~ 60 KHz
  • Transmit Frequencies: 38 KHz ~ 56 KHz
• Range:
  • 12 meters (40 ft) @ 38 KHz
  • 7.6 meters (25 ft) @ 56KHz
• Power: 12V DC 30mA max.
• 45 (L) x 14 (W) x 13 (H) mm
• Cord Length: 3 meters (10 ft)
• Connector Type: 3.5mm TRS mini plug
• Weight: 28 g

PRO1188A IR Distribution over coax kit

This kit allows IR signals to be inserted onto a coax cable in one location and extracted from coax on another location.

We are all familiar with infra-red remote controls because we use them to operate our TV, DVD players etc. on adaily basis. However, you might not be familiar with "IR repeating." IR repeating allows you to control devices that are not with in the direct line of sight of your remote control. This kind of a system is commonly used in distributed audio / video systems where the source components are centrally located, or when you wish to control your source devices remotely from an entirely different location.

• Creates an IR system with existing wiring
• Power 4 IR receivers with one power supplied (included)
• Quick and easy installation

• IR injector
  • Passes the TV signal from input to output
  • Injects the signal from the infrared receiver to the side of the injector that goes "upstream" to the coupler
  • Connects power from the power supply to the infrared receiver
• IR coupler
  • It passes the TV signal from input to output
  • It extracts the infrared signal from the downstream injector to drive one or more infrared emitters
• Dual IR emitter (also sold seperately PRO1142/​37168732)
• Mini sticker IR receiver
• 12V DC 200mA power supply

Does the IR target work with plasmas?
Some plasmas are better shielded than others. In the one instance that we’ve tested the IR targets, it has worked without any issue.

How come you need to buy "special" IR passing splitters when using this product?
The special thing about IR passing splitters (eg ChannelPlus branded splitters) is that they allow voltage to pass in both directions. Standard splitters, with their internal diode, only allow voltage to pass up the splitter. Since IR systems require this voltage to also be passed down the splitter also, you how to ensure that you choose the correct model.

• Spare receiver for PRO1188A, it includes PRO1186 IR injector and PRO1178 mini IR receiver
• Dimension: 47mm x 35mm x 20mm

Does the IR target work with plasmas?
Some plasmas are better shielded than others. In the one instance that we’ve tested the IR targets, it has worked without any issue.

How come you need to buy "special" IR passing splitters when using this product?
The special thing about IR passing splitters (eg ChannelPlus branded splitters) is that they allow voltage to pass in both directions. Standard splitters, with their internal diode, only allow voltage to pass up the splitter. Since IR systems require this voltage to also be passed down the splitter also, you how to ensure that you choose the correct model.